Results for electronic metal voltage detector
Electronic Metal & Voltage Detector
Electronic Metal & Voltage Detector: Electronic metal and voltage detector Tool to detect hidden electricity cables and water and gas pipes concealed behind walls When metal is detected LED will shine continuously and a continuous audible sound will be emitted When electricity is detected LED will flash and an intermittent sound will be heard Metal test depth: 24mm Voltage test depth: 40mm-240v / 30mm-110v Note: will not detect through stone walls
Toolzone 2 In 1 Metal & Voltage Detector
Toolzone 2 In 1 Metal & Voltage Detector: Toolzone 2 In 1 Metal & Voltage Detector A \"must have\" tool when fixing anything to the wall as it detects both metal and voltage Simple to use and full instructions are included Emits both visual and audible warning It operates using a 9V battery (included) Carries the European CE mark of approval Colour: Black
Silverline Metal & Voltage Detector 1 X 9v (pp3)
Silverline Metal & Voltage Detector 1 X 9v (pp3): Hand-held metal and voltage detector with LED and audible signal Locates live cables and metal objects in walls, floors and ceilings Adjustable detector sensitivity for improved accuracy Requires 1 x 9V (PP3) battery.
Velleman K7101 Mains Voltage Detector Electronics Kit
Velleman K7101 Mains Voltage Detector Electronics Kit: Velleman-Mains-Voltage-Detector-Kit-Velleman-K7101-The-Velleman-Mains-Voltage-Detector-Kit-makes-it-easy-to-check-wires-for-mains-voltage-even-if-they-are-installed-in-or-behind-walls-The-device-can-also-be-used-to-trace-interruptions-in-wiring-A-flashing-LED-indicates-whether-or-not-voltage-is-present-and-the-flash-speed-indicates-how-close-the-wire-is-If-an-audible-signal-is-also-needed-space-has-been-provided-on-the-PCB-for-a-buzzer-to-be-connectedVelleman-K7101-Mains-Voltage-Detecto...
Draper Draper 501g Combined Metal, Voltage And Stud Detector
Draper Draper 501g Combined Metal, Voltage And Stud Detector: The Draper 501G Combined Metal, Volatge and Stud Detector is designed to detect live or dead electricity cables, metallic water pipes, nails and other metal objects and wood studs in partition walling which can be located without causing surface damage.
Machine Mart Xtra Draper D389 Expert Combined Metal, Voltage And ...
Machine Mart Xtra Draper D389 Expert Combined Metal, Voltage And Stud Detector: The D389 Expert Combined Detector has been designed to detect live and dead electricity cables, metallic water pipes, nails and wood studs in partition walling, a buzzer then sounds when the objects have been located.
Expert Combined Metal, Voltage And Stud Detector
Expert Combined Metal, Voltage And Stud Detector: Detects live and dead electricity cables metallic water pipes nails and wood studs in partition walling Buzzer sounds when objects are located Maximum depth penetration; live AC wires 75mm; metal 75mm wood 18mm; metal pipes 38mm and copper pipes 30mm Uses a PP3 size battery sold separately Manufactured for Draper Tools by Kapro Display packed
Uni-t Ut33b Auto-ranging Digital Multimeter Ac Voltage Detector P...
Uni-t Ut33b Auto-ranging Digital Multimeter Ac Voltage Detector Portable Ohm/volt Test Meter Multi Tester With Backlight Lcd Display: Type:Multimeter; Power Supply:9V, 6F22 Battery; Screen Size (mm):4816; LCD Display:Yes; DC Voltage (V):0.2/2/20/200/500; AC Voltage (V):200/500; DC Current (mA):0.0002/0.2/10; Model:UT33B; Low Battery Indicator:yes; Net Dimensions(cm):137.353.5; Shipping Weight(kg):0.2, 0.2; Net Weight(kg):0.179; Diode Test:Yes; Max. Display:1999
Di-log Dl1093 Stud Metal And Voltage Detector
Di-log Dl1093 Stud Metal And Voltage Detector: Di-Log-DL1093-Stud-Metal-and-Voltage-Detector-Di-log-DL1093-P-The-Di-Log-Di-Log-DL1093-is-a-Stud-Metal-and-Voltage-Detector-that-will-detect-electricity-cables-metal-pipes-metal-studs-and-wood-battens-The-LED-indicator-on-the-detector-will-flash-together-with-a-continuous-audible-sound-when-something-is-detected-The-DL1093-is-able-to-detect-AC-voltage-between-50V-and-600V-P-Di-Log-DL1093-Stud-Metal-and-Voltage-Detector
Sealey Ak2018 3-in-1 Metal, Voltage And Stud Detector
Sealey Ak2018 3-in-1 Metal, Voltage And Stud Detector: Sealey-3-in-1-Metal-Voltage-and-Stud-Detector-Sealey-AK2018-This-combined-unit-can-accurately-detect-live-or-dead-electricity-cables-water-or-gas-pipes-and-wooden-studs-or-battens-with-ease-Sealey-AK2018-3-in-1-Metal-Voltage-and-Stud-Detector
Voltage Detector
Voltage Detector: Compact pen-type voltage detector with pocket clip and impact resistant ABS case. Easy to use, just place the white tip where you wish to detect voltage. Can be used to detect voltage in household appliances or electronic equipment, etc. AC voltage test: non-contact from 90VAC to 1000VAC. Visual red LED alarm and audible 90dBA alarm . Supplied with 2 x 1.5v AAA batteries .
3-in-1 Metal Timber Stud Live Wire Voltage Detector Finder Ce & R...
3-in-1 Metal Timber Stud Live Wire Voltage Detector Finder Ce & Rohs Approval: 3-in-1 Stud Voltage & Metal finder Detector Compact for detecting studs in ceiling joists, timber live AC wire and metal objects Ce and Rohs Approved
Ak2018 3-in-1 Metal, Voltage & Stud Detector
Ak2018 3-in-1 Metal, Voltage & Stud Detector: Combined unit to accurately detect live or dead electricity cables, water or gas pipes and wood studs or battens with ease. Powered by a 9Volt battery (not supplied). The detector will, with a red and green LED display and an audible signal, show the presence of metal, electricity and wooden studs or battens. Supplied with full instructions.
Metal-voltage-stud Detector
Metal-voltage-stud Detector: impact resistant 27mm maximum depth of penetration detects live/dead electricity cables
Sp127 Vehicle Car Metal Dc 12v 15a 110db Warn Loud Horn Trumpet
Sp127 Vehicle Car Metal Dc 12v 15a 110db Warn Loud Horn Trumpet: Material:Metal; Voltage:12V; For:Motorcycle
Velleman K7102 Metal Detector Electronics Kit
Velleman K7102 Metal Detector Electronics Kit: Velleman-Metal-Detector-Electronics-Kit-Velleman-K7102-With-this-handy-Velleman-Metal-Detector-Kit-you-can-find-out-before-drilling-whether-there-are-metal-objects-to-be-found-in-a-wall-ceiling-or-floor-so-avoiding-the-potentially-catastrophic-consequences-of-drilling-into-gas-or-water-pipes-or-through-an-electric-cable-An-LED-indicates-if-there-is-a-metal-object-in-the-vicinity-giving-you-peace-of-mind-when-you-start-repair-or-decoration-work-If-an-audio-signal-is-also-desired-space-ha...
Franzis 65241 Metal Detector Kit
Franzis 65241 Metal Detector Kit: Franzis-65241-Metal-Detector-Kit-Franzis-9783645652414-P-The-Franzis-Metal-Detector-kit-is-easy-to-build-even-with-little-soldering-experience-you-will-be-able-to-assemble-the-kit-quickly-as-the-main-circuit-board-is-already-pre-assembled-The-remaining-components-are-connected-quickly-Just-add-a-few-common-household-materials-yoghurt-pot-adhesive-tape-glue-and-your-metal-detector-will-be-ready-for-use-P-P-Have-you-ever-lost-a-treasured-metal-object-in-the-garden-or-at-the-beach-...
Voltage/current Detector Jeti Duplex Mui 50
Voltage/current Detector Jeti Duplex Mui 50: The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system.
Voltage/current Detector Jeti Duplex Mui 30
Voltage/current Detector Jeti Duplex Mui 30: The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the Duplex System which allows you to transfer control data to the model and also back to the transmitter. The obtained telemetrical data is transferred in real time during the operation and the current...
Voltage/current Detector Jeti Duplex Mui 75
Voltage/current Detector Jeti Duplex Mui 75: The MUI sensors are designed for measuring voltages, currents and consumed battery capacity in the model. The Terminal JETIBOX is used for representation of measured values and the information is transmitted wirelessly via the DUPLEX 2.4GHz system. The 2.4GHz band is used for communication by the Duplex System which allows you to transfer control data to the model and also back to the transmitter. The obtained telemetrical data is transferred in real time during the operation and the current...