Results for interfit strobies pro clamp
The Interfit Strobies Pro Clamp is designed to allow flashguns or other accessories with a 1/4\" thread adapter to be secured in a wide variety of locations. The expandable jaws will fit onto most surfaces up to 4cm in width and a removable insert will allow it to grip onto round poles.
Click For Info
This 5 metre extension cable is for use with the Interfit Strobies Pro-Flash system, enabling a greater working distance between your Pro-Flash and its battery. When using multiple lights from a single battery this allows you to properly space the heads in order to provide multiple-angle...
Click For Info
This is a spare bulb for use with the Interfit Strobies Pro-Flash One Eighty flash unit.
Click For Info
The Interfit Strobies ProFlash Snoot Kit contains two snoots (1x conical and 1x cylindrical) with honeycombs and is for use with the portable Strobies Pro-Flash One Eighty flash unit (not included, available separately). Snoots and honeycombs are used to provide a smaller, tighter and a more...
Click For Info
The Interfit Strobies Flexi Adapter Arm with Hotshoe Adapter is designed to clamp to a lightstand or any surface up to 35mm. The 30cm long Flexi Adapter Arm allows you to position a hotshoe mountable flashgun in a whole range of positions to achieve the desired effect.
Click For Info
The Interfit Strobies Boom Arm is designed to enable the use of flashguns at height. The clamp fits directly to any standard light stand and extends to a maximum length of 140cm. A counterbalance bag is supplied to which you can add weights as required.
Click For Info
This Interfit reflector with umbrella-holder is exclusively for use with the Strobies Pro-Flash One Eighty. The ability to use an umbrella with your lighting rig will open up a wide array of lighting options opportunities.
Click For Info
This transmitter/receiver set is for use with the Strobies Pro-Flash TLi-C/TLi-N, allowing you to fully program and control up to 16 Pro-Flash units from up to 50m away. The unit can also be used to control other Pro-Flash lights, such as the Pro-Flash One-Eighty and Pro-Flash 360. Additional...
Click For Info
This gel and honeycomb set is designed specifically for use with the Strobies Pro-Flash One Eighty standard reflector, as supplied with the One-Eighty. The honeycomb will help tighten the eminated light and the four coloured gels (cyan, magenta, green and yellow) provide some interesting lighting...
Click For Info
This is a replacement mains-powered battery charger for use with the Strobies Pro-Flash TLi-C and TLi-N Li-Ion batteries. It is capable of fully recharging batteries in three hours.
Click For Info
Designed to power the Interfit Pro-Flash TLi-C and TLi-N, this spare or replacement lithium-ion battery holds sufficient charge to power 650 full-power flashes. It recharges in 3 hours and is supplied with a battery charger.
Click For Info
Interfit\'s ProFlash One Eighty is a bare-bulb flash with a 180W/s output, which can be used either on or off camera, in conjunction with the Pro-Flash battery pack (not included, available separately). This additional head will add further versatility to your One Eighty setup and the optional...
Click For Info
This speedlite softbox will add a softening quality to your flashgun\'s light - which can otherwise be overly harsh and unflattering - and is absolutely ideal for event, portrait and product photography. The speedlight bracket\'s jaws open up to 80mm in width and 55mm in height, ensuring...
Click For Info
When used with the Pro-Flash Transmitter, this receiver unit can be used to trigger the Pro-Flash TLI-C/TLI-N Flashgun wirelessly from up to 50m (165 feet) away. The receiver plugs into the Wireless Control Port on the side of the unit and does not require batteries. The receiver operates over 16...
Click For Info
This speedlite softbox will add a softening quality to your flashgun\'s light - which can otherwise be overly harsh and unflattering - and is absolutely ideal for event, portrait and product photography. The speedlight bracket\'s jaws open up to 80mm in width and 55mm in height, ensuring...
Click For Info
This speedlite softbox will add a softening quality to your flashgun\'s light - which can otherwise be overly harsh and unflattering - and is absolutely ideal for event, portrait and product photography. The speedlight bracket\'s jaws open up to 80mm in width and 55mm in height, ensuring...
Click For Info
This diffuser softens and spreads the light from your Pro-Flash, creating a more even, ambient lighting effect.
Click For Info