Results for park tool bag 15

1234567Next

Park Tool BAG-15

Park Tool Bag-15

Park Tool Bag-15: Repair Stand Accessory / Material: Plastic

Park Tool TWB-15 Crowfoot Pedal Wrench

Park Tool Twb-15 crowfoot Pedal Wrench

Park Tool Twb-15 crowfoot Pedal Wrench: Park Tool TWB-15 Crowfoot Pedal WrenchThe TWB-15 is used with any 3/8\" drive torque wrench to verify pedals are torqued to the correct spec. It is laser cut, heat treated, and plated for long life  It fits 15mm wrench flats on the pedals and is 5mm thick. Features: Fits with any 3/8\" drive torque wrench 15mm wrench 5mm thick Laser cut and heat treatedBuy Park Tool Workshop from Chain Reaction Cycles, the World\'s Largest Online Bike Store.

Park Tool SS-15 Single Speed Spanner

Park Tool Ss-15 Single Speed Spanner

Park Tool Ss-15 Single Speed Spanner: Bike Multi Tool / Tools: Screw wrench, Tire Lever, Bottle Opener

Park Tool CRS-15 Crown Race setter

Park Tool Crs-15 Crown Race Setter

Park Tool Crs-15 Crown Race Setter: Crown Race Setting Tool / Suitable for: Bike fork, Headset

Park Tool TNS-15

Park Tool Tns-15

Park Tool Tns-15: Bike Tool / Suitable for: Bike fork / Material: Steel

Park Tool HCW-15 Headset Wrench

Park Tool Hcw-15 Headset Wrench

Park Tool Hcw-15 Headset Wrench: Headset Wrench / Material: Steel / Key Sizes: 32mm, 36mm

Park Tool Bag-20

Park Tool Bag-20

Park Tool Bag-20: Repair Stand Accessory

Park Tool PHT-15 P-Handled T15 Star-Shaped Wrench

Park Tool Pht-15 P-handled T15 Star-shaped Wrench

Park Tool Pht-15 P-handled T15 Star-shaped Wrench: Made from high torque industrial steel and through hardened for long life the Park Tool PHT-15 P-Handled T15 Star-Shaped Wrench fits Torx style fasteners. Park Tool PHT-15 P-Handled T15 Star-Shaped Wrench Features Replacement Star-shaped wrench to fit Torx style fasteners, the PHT wrench features the proprietary Park Tool P-handle, designed for comfort, control and leverage Made from high torque industrial steel and through

Park Tool TNS-15 Threadless Nut Setter

Park Tool Tns-15 Threadless Nut Setter

Park Tool Tns-15 Threadless Nut Setter: The Park Tool TNS-15 Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS-15, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers. The TNS-15 is used for 1-1/4 and 1.5 threadless headset systems. Park Tool TNS-15 Threadless Nut Setter Features Using a durable steel driver and built-in guide, t

Park Tool CRS-15 Crown Race Setter for 1.5 Inch Column

Park Tool Crs-15 Crown Race Setter For 1.5 Inch Column

Park Tool Crs-15 Crown Race Setter For 1.5 Inch Column: The Park Tool CRS-15 Crown Race Setter for 1.5 inch Column uses two different insert rings to install bearing races on the 1.5 and 1-1/4 forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-15 will work on forks with column length of 330mm or less. Park Tool CRS-15 Crown Race Setter for 1.5 inch Column Features Precision...

Park Tool SW-15 3 Way Internal Nipple Wrench

Park Tool Sw-15 3 Way Internal Nipple Wrench

Park Tool Sw-15 3 Way Internal Nipple Wrench: The innovative Park Tool SW-15 3-way Nipple Wrench featuring three different sized wrenches to fit internal spoke nipples. Park Tool 3-way Nipple Wrench Features Screwdriver handled wrench to fit internal spoke nipples on deep section aero rims Featuring a square drive to perfectly into the tight surroundings of most rims Extra long (3.25 inch / 8.5 cm) spoke wrench socket to prevent fouling on rim Note: Wheel manufacturer specifications can change without notice Covered b

Park Tool HR-15 15mm Hex Wrench

Park Tool Hr-15 15mm Hex Wrench

Park Tool Hr-15 15mm Hex Wrench: The Park Tool 15mm Hex Wrench is L-Shaped to fit Shimano® rear thru-axle freehubs. Park Tool 15mm Hex Wrench Features The HR-15 is an L-shaped 15 mm Hex Wrench for removing the Freehub body from Shimano® rear thru-axle hubs The short shaft of the wrench is 40 mm and the long shaft is 275 mm for leverage The HR-15 is made from industrial quality steel, with chamfered tips for a clean fit Made in the USA and covered by Park Tool's legendary limited l

Park Tool TWB-15 Crowfoot Pedal Wrench

Park Tool Twb-15 Crowfoot Pedal Wrench

Park Tool Twb-15 Crowfoot Pedal Wrench: The Park Tool TWB-15 Crowfoot Pedal Wrench is used to verify that your pedals torque is to the correct spec. This Park tool is compatible with with any 3/8 inch drive torque wrench and has been laser cut heat treated and plated to ensure it has a long life. Park Tool TWB-15 Crowfoot Pedal Wrench Features Use with any 3/8 inch drive torque wrench to verify pedals are torqued to the correct spec Laser cut, heat treated and plated for long life Made in the USA and covere

Park Tool CRC-15 Crown Race Cutter Adaptor

Park Tool Crc-15 Crown Race Cutter Adaptor

Park Tool Crc-15 Crown Race Cutter Adaptor: Used in conjunction with the CRC-1 Park Tool Crown Race Cutting Tool to machine 39.8mm crown race seats (1.5 standard) on tapered forks with 1-1/8 steerer tubes. Includes precision-machined adaptor body and 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5 taper of 4.25 inches. Park Tool Crown Race Cutting Tool Features Adaptor for the Park CRC-1 that allows the quick and perfect facing of 1.5 inch / 39.8 mm standard crown races Des

Park Tool AWS-15 Aluminium Body 3-Way Hex Wrench

Park Tool Aws-15 Aluminium Body 3-way Hex Wrench

Park Tool Aws-15 Aluminium Body 3-way Hex Wrench: The Park Tool Aluminum Body 3-Way Hex Wrench features a forged, two-piece, anodized, ergonomically designed aluminum body and replaceable hex wrenches. 4mm, 5mm, and 6mm wrenches are made from industrial-strength heat-treated steel for long life. Park Tool Aluminum Body 3-Way Hex Wrench Features 4mm, 5mm, and 6mm hex set Wrenches made from industrial tool steel, through hardened and tempered for long life Chamfered tips for a perfect fit

Park Tool HCW-15 32/36mm Headset Wrench

Park Tool Hcw-15 32/36mm Headset Wrench

Park Tool Hcw-15 32/36mm Headset Wrench: The popular and versatile Head Wrenches feature the proven “Y” head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort. Park HCW-15 32/36mm Headset Wrench...

Parat Top-Line Tool Case (15.000-571)

Parat Top-line Tool Case (15.000-571)

Parat Top-line Tool Case (15.000-571): Tool Bag Empty / Application: Universal / Series: Parat Top-Line / Dimensions: 42 x 18.5 x 31.5 cm

Park Tool 3-way internal nipple wrench Workshop Tools

Park Tool 3-way Internal Nipple Wrench Workshop Tools

Park Tool 3-way Internal Nipple Wrench Workshop Tools: Featuring a square drive, plus 5 and 5.5 mm hexes that slip perfectly into the tight surroundings of most rims. The SW-15 works on wheels made by numerous manufacturers including, but not limited to: FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo and Mavic

Park Tool PAW-12 Adjustable Wrench

Park Tool Paw-12 Adjustable Wrench

Park Tool Paw-12 Adjustable Wrench: Adjustable Spanner / Quantity: 1 Piece / Wrench Sizes: 1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 2, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 3, 30, 31, 32, 33, 34, 35, 36, 4, 5, 6, 7, 8, 9 mm


1234567Next