Results for power tec power tec panel clamp kit

123456Next

Power-Tec Power-Tec 92299 - 5 Piece Midget Panel Clamp Set

Power-tec Power-tec 92299 - 5 Piece Midget Panel Clamp Set

Power-tec Power-tec 92299 - 5 Piece Midget Panel Clamp Set: Power-Tec 92299 - 5 Piece Midget Panel Clamp Set.

Machine Mart Xtra Power-Tec - Tec Spot Welder

Machine Mart Xtra Power-tec - Tec Spot Welder

Machine Mart Xtra Power-tec - Tec Spot Welder: The Power-Tec Tec-Spot Welder is a general use weld in professional bodywork repair shops and is suitable for a wide range of welding applications involving panel pulling pins, pull washers and squiggly wire. Complete with a variety of electrodes and supplied with a slide hammer and multi hook head.

Power-Tec Power-Tec - 58100S Tec Spot

Power-tec Power-tec - 58100s Tec Spot

Power-tec Power-tec - 58100s Tec Spot: Producing a professional grade finish ideal for any automotive workshop, the Tec Spot from Power-Tec is a comprehensive kit manufactured for the easy removal of dents and damage to automotive bodywork. Complete with everything you need for quick and easy dent pulling, the Tec Spot includes squigley wire, pulling pins, electrode accessories, earth and a slide hammer. Simply weld on the pulling pins and use the slide hammer to gently pull and massage the dents out of the bodywork, leaving a...

Power-Tec Power-Tec - Magnetic Roller Tip Panel Repair Kit

Power-tec Power-tec - Magnetic Roller Tip Panel Repair Kit

Power-tec Power-tec - Magnetic Roller Tip Panel Repair Kit: To be used on the inside of bodywork panels, rather than the outside to avoid potential further damage to your precious paintwork. Extended and angled for greater access and featuring magnetic rollers to ensure the tools are positioned correctly when in use, these useful tools require minimum effort from the user, but produce brilliant results. The set even includes a panel contour guide, used to show any dents that need removing and those that may have been missed during repair.

Power-Tec Power-Tec - 3 Piece Inflatable Panel Bag Set

Power-tec Power-tec - 3 Piece Inflatable Panel Bag Set

Power-tec Power-tec - 3 Piece Inflatable Panel Bag Set: A set of three inflatable air bags/pads, used for opening cars doors in emergency situations and for positioning them during repair work. Simple to use with the supplied high pressure hand pump.

Power-Tec Power-Tec - Panel Clamp Kit

Power-tec Power-tec - Panel Clamp Kit

Power-tec Power-tec - Panel Clamp Kit: For use in confined spaces such as door openings this panel clamp kit is a fantastic alternative to welding clamps. Easy to use, this comprehensive set does the same job as welding clamps, but doesn't require tacking before use, as the kit simply holds panels together in a secure grip ready for welding. Complete with clamps of varying sizes and level for hammering into place and removing clip after welding.

Power-Tec Power-Tec - 50mm Mini Air Sander

Power-tec Power-tec - 50mm Mini Air Sander

Power-tec Power-tec - 50mm Mini Air Sander: This 50mm sander is ideal for most panel repair jobs. Its smaller dimensions mean it is ideal for intricate, more delicate sanding, in even tight, hard to reach areas. It promotes user accuracy, ensuring you only remove paint and metal from the desired areas, not surrounding ones. Operating at 25000rpm & 6.2bar, this is easily capable of removing paint and metal from bodywork and any other surface requiring treatment.

Power-Tec Power-Tec - Plug Weld Pliers

Power-tec Power-tec - Plug Weld Pliers

Power-tec Power-tec - Plug Weld Pliers: For use during MIG welding, these plug weld pliers from Power-Tec provide the user with even better weld penetration and don't allow burning through even thin panels when welding. They clamp and support the weld area for greater accuracy, safety and finish.

Power-Tec Power-Tec - Grip On Welding Clamp Set (5 Pack)

Power-tec Power-tec - Grip On Welding Clamp Set (5 Pack)

Power-tec Power-tec - Grip On Welding Clamp Set (5 Pack): A useful set of 5 welding clamps of varying shapes, manufactured to clamp panels together allowing for safe, accurate welding. Complete with a JJ Clamp, W Clamp, LL Clamp, J Clamp and L Clamp. All are fitted with a quick release catch for ease of use and for avoiding damage to the user's hands.

Power-Tec Power-Tec - GF2000 Micro Welding Clamp

Power-tec Power-tec - Gf2000 Micro Welding Clamp

Power-tec Power-tec - Gf2000 Micro Welding Clamp: Small and versatile, this micro welding clamp works like any other, yet it can be used in areas were regular sized clamps are not able to operate. Designed for single handed operation for increased welding accuracy and safety, this is perfect for positioning and fixing panels securely for welding, wherever and whenever needed.

Power-Tec Power-Tec - Pack Of Four Micro Welding Clamps

Power-tec Power-tec - Pack Of Four Micro Welding Clamps

Power-tec Power-tec - Pack Of Four Micro Welding Clamps: These small and strong welding clamps are extremely versatile, able to fit in confined areas to provide a strong hold for welding in hard to reach places where other clamps wouldn't fit. Designed for single hand operation to allow your free hand to hold the panels together ensuring an accurate weld. A must have for any workshop.

Machine Mart Xtra Power-Tec - GF3 Welding Clamp

Machine Mart Xtra Power-tec - Gf3 Welding Clamp

Machine Mart Xtra Power-tec - Gf3 Welding Clamp: 'LL' Style clamp for use when fixing side and quarter panels and sills. Allows you to still close boots, bonnets, doors and tailgates to check alignment before welding.

Power-Tec Power-Tec - Holder For 3 Point Electrode

Power-tec Power-tec - Holder For 3 Point Electrode

Power-tec Power-tec - Holder For 3 Point Electrode: This 3 point electrode holder is a spare part for the Power-Tec Panel Medic panel repair kit which is used with spot welders or Power-Tec's Tec-Spot system for the easy removal of body panel dents and damage.

Power-Tec Power-Tec - PullRite and Slide Hammer

Power-tec Power-tec - Pullrite And Slide Hammer

Power-tec Power-tec - Pullrite And Slide Hammer: Easy to use, the Power-Tec PullRite is a clever piece of kit, designed to be used with squiggly wire to rough out panel damage. The PullRite simply hooks onto the squiggly wire after it has been welded to a panel, allowing for a firm, gentle pull to remove dents and dings. The PullRite can be pulled by hand, or by a slide hammer when a slightly firmer pull is needed.

Machine Mart Xtra Power-Tec - Panel Medic Body Repair Kit

Machine Mart Xtra Power-tec - Panel Medic Body Repair Kit

Machine Mart Xtra Power-tec - Panel Medic Body Repair Kit: A comprehensive tool kit for the repair of body panels all round a vehicle. Complete with everything you need to pull out and remove dents from bodywork. For use with a spot welder, mini welder or Power-Tec's Tec Spot to produce high quality results with ease, ideal for the professional bodywork mechanic.

Power-Tec Power-Tec - Slide Hammer For Tec Spot Kit

Power-tec Power-tec - Slide Hammer For Tec Spot Kit

Power-tec Power-tec - Slide Hammer For Tec Spot Kit: Replacement slide hammer for the Power-Tec Tec Spot bodywork repair kit.

Machine Mart Xtra Power-Tec - Squigley Wire Electrode Kit

Machine Mart Xtra Power-tec - Squigley Wire Electrode Kit

Machine Mart Xtra Power-tec - Squigley Wire Electrode Kit: The Squigley wire electrode kit is to for use with the Power-Tec Tec Spot kit and can be bought as a an additional electrode or as a replacement part. This is an integral part of the kit as it is used to weld the squigley wire onto the damaged body panel ready for repair.

Power-Tec Power-Tec - AiroPower Standard Unit

Power-tec Power-tec - Airopower Standard Unit

Power-tec Power-tec - Airopower Standard Unit: The AiroPower from Power-Tec is a high power, high quality unit, ideal for all manner of automotive body work repairs. Capable of pushing or pulling up to 5.5 tons, yet compact enough to be operated single handedly, this is a must have for any automotive workshop. It can push or pull out large dents in body panels all around a vehicle and thanks to the supplied rubber pads and oil free, air operation there is no risk of further damage to body work, or interiors. An all round fantastic bit of...

Power-Tec Power-Tec - Glue Pads (6 Pack)

Power-tec Power-tec - Glue Pads (6 Pack)

Power-tec Power-tec - Glue Pads (6 Pack): For use with the Power-Tec Gluematic Glue Gun, these glue pads are ideal for a wide range of applications and for being used with the Power-Tec glue puller system. In a pack of six these are great value for money.

Power-Tec Power-Tec - 11 Piece Master Dolly Spoon Set

Power-tec Power-tec - 11 Piece Master Dolly Spoon Set

Power-tec Power-tec - 11 Piece Master Dolly Spoon Set: A comprehensive kit ideal for the professional automotive bodyshop, the master dolly spoon set from Power-Tec comes complete with a wide range of spoons, files and dollies manufactured for use on various panels around a vehicle and for various bodywork repair applications. A great value complete package, this set even comes with a useful heavy duty steel case for storage and organisation.


123456Next