Results for kemo m114n flasher module with adjustable flash sequence component

12Next

Kemo M114N Flasher Module with Adjustable Flash Sequence Component

Kemo M114n Flasher Module With Adjustable Flash Sequence Component

Kemo M114n Flasher Module With Adjustable Flash Sequence Component: Kemo-M114N-Bulb-Flasher-Module-with-Adjustable-Timing-Kemo-M114N-An-adjustable-flasher-module-for-incandescent-and-LED-bulbs-ideal-for-advertisements-warning-lights-party-lighting-model-lighthouses-etc-Flash-timing-is-variable-from-approx-0-6-to-9s-on-time-Kemo-M114N-Flasher-Module-with-Adjustable-Flash-Sequence-Component

Mobile Phone Flasher Module with 2 LEDs

Mobile Phone Flasher Module With 2 Leds

Mobile Phone Flasher Module With 2 Leds: Mobile-Phone-Flashing-Indicator-Module-RVFM-BPSH-02M-A-flashing-LED-module-that-responds-to-the-radio-signals-from-adjacent-mobile-phones-Mobile-Phone-Flasher-Module-with-2-LEDs

Kemo M079 Flasher / Alternating Flasher Module

Kemo M079 Flasher / Alternating Flasher Module

Kemo M079 Flasher / Alternating Flasher Module: Kemo-M079-Flasher-Alternating-Flasher-Module-Kemo-M079-P-This-very-small-highly-integrated-flasher-module-can-directly-drive-up-to-10-light-emitting-diodes-LEDs-It-can-simultaneously-flash-one-or-several-light-emitting-diodes-or-flash-2-LEDs-or-LED-groups-alternately-The-module-is-short-circuit-proof-and-protected-against-reverse-polarity-P-P-Due-to-its-very-small-slim-design-this-flasher-is-also-suitable-for-sewing-into-clothing-as-well-as-for-use-in-models-and-toys-P-Kemo-M07...

Kemo M142 LED Constant Current Source Module

Kemo M142 Led Constant Current Source Module

Kemo M142 Led Constant Current Source Module: Kemo-M142-Constant-Current-LED-Driver-Module-Kemo-M142-This-module-consists-of-an-LED-soldered-to-a-constant-current-circuit-It-can-be-connected-to-any-voltage-between-4-and-30V-DC-The-LED-shines-with-almost-constant-brightness-regardless-of-voltage-and-has-a-current-consumption-of-approx-15mA-No-additional-protective-resistor-is-required-If-required-the-supplied-LED-can-be-substituted-for-any-other-similar-LED-It-is-also-possible-to-connect-several-LEDs-in-series-Kemo-M142-LED-Constan...

Kemo M173 Soil Moisture Humidity Sensor Relay Switch Module

Kemo M173 Soil Moisture Humidity Sensor Relay Switch Module

Kemo M173 Soil Moisture Humidity Sensor Relay Switch Module: Kemo-M173-Soil-Moisture-Humidity-Sensor-Module-Kemo-M173-P-This-watering-regulator-module-measures-the-soil-moisture-and-depending-on-the-result-can-be-used-to-turn-your-watering-system-on-and-off-The-measuring-probe-of-the-module-is-buried-in-the-ground-at-the-desired-depth-and-is-connected-to-the-main-module-with-approx-2m-of-cable-The-sensor-cable-can-be-extended-with-normal-2-way-cable-up-to-20m-If-your-garden-is-to-be-watered-only-on-certain-days-or-at-particular-times-of-the-da...

Kemo M152 12V Rain Detector Sensor Relay Module, Pre-Assembled

Kemo M152 12v Rain Detector Sensor Relay Module, Pre-assembled

Kemo M152 12v Rain Detector Sensor Relay Module, Pre-assembled: Kemo\'s M152 module combines a liquid sensing plate and 12V normally open contact relay to produce a switching operation based on an input of rainfall or snowfall. The relay is activated when rain is detected on the sensor plate and de-activated when water is no longer present. Integrated heating avoids standing water on the plate once it has stopped raining. Potential projects could include motorised windows, automated awnings or even automatic washing line covers! To use this module with 240V...

Kemo M148A Battery Guard Module

Kemo M148a Battery Guard Module

Kemo M148a Battery Guard Module: Kemo-M148A-Battery-Guard-Total-Discharge-Protection-Module-Kemo-M148A-Avoid-the-nuisance-and-damaging-effects-of-a-discharged-car-battery-with-the-Kemo-M148A-battery-guard-module-The-module-cuts-power-to-accessories-if-the-battery-voltage-drops-below-the-set-minimum-Choose-between-10-4V-11V-12V-13V-13-3V-When-regular-voltage-is-restored-i-e-when-battery-is-recharged-the-power-to-accessoriess-is-re-established-Kemo-M148A-Battery-Guard-Module

Kemo M038N 24 - 26V To 12V DC-DC Converter Module Component

Kemo M038n 24 - 26v To 12v Dc-dc Converter Module Component

Kemo M038n 24 - 26v To 12v Dc-dc Converter Module Component: Kemo-M038N-24V-To-12V-DC-to-DC-Converter-Module-Kemo-M038N-This-voltage-convertor-module-is-ideal-for-operating-12V-DC-vehicle-accessories-and-equipment-from-a-24V-battery-source-E-g-using-a-conventional-12V-car-radio-in-a-truck-or-boat-with-a-24V-supply-The-output-of-the-module-is-short-circuit-proof-and-voltage-regulated-Kemo-M038N-24-26V-To-12V-DC-DC-Converter-Module-Component

Kemo M048 Ultrasound Generator Module Component 12 - 15 VDC

Kemo M048 Ultrasound Generator Module Component 12 - 15 Vdc

Kemo M048 Ultrasound Generator Module Component 12 - 15 Vdc: Kemo-M048-Ultrasonic-Generator-Module-Kemo-M048-This-powerful-ultrasonic-generator-is-ideal-for-chasing-away-rats-mice-wild-rabbits-birds-etc-When-connected-to-a-suitable-piezo-speaker-the-module-produces-an-ultrasonic-tone-with-a-constantly-changing-frequency-Humans-can-usually-only-hear-frequencies-up-to-22kHz-so-only-the-animals-will-hear-the-sound-A-flashing-LED-on-the-module-indicates-when-it-is-in-operation-The-module-can-power-up-to-5-piezoelectric-speakers-Kemo-M048-Ultrasou...

Kemo M158 Water Sensor Relay Switch Module, 9-12VDC

Kemo M158 Water Sensor Relay Switch Module, 9-12vdc

Kemo M158 Water Sensor Relay Switch Module, 9-12vdc: Kemo-M158-Water-Sensor-Relay-Switch-Module-9-12V-DC-Kemo-M158-P-This-module-has-a-very-sensitive-input-for-a-pair-of-probes-When-the-2-probes-come-into-contact-with-water-a-relay-switches-on-which-can-be-used-to-control-sirens-lights-pumps-etc-P-P-The-water-sensors-use-an-extremely-low-voltage-in-order-to-prevent-the-otherwise-usual-oxidisation-through-galvanic-currents-P-Kemo-M158-Water-Sensor-Relay-Switch-Module-9-12VDC

Kemo B073 Universal Preamplifier Module

Kemo B073 Universal Preamplifier Module

Kemo B073 Universal Preamplifier Module: Kemo-B073-Universal-Preamplifier-Module-Kit-Kemo-B073-A-kit-of-parts-to-build-a-2-stage-pre-amplifier-with-a-wide-frequency-range-Ideal-as-a-pre-amplifier-for-power-amplifiers-or-as-headphone-amplifier-Kemo-B073-Universal-Preamplifier-Module

Kemo M171 Speed Controller Component 9 - 28 VDC

Kemo M171 Speed Controller Component 9 - 28 Vdc

Kemo M171 Speed Controller Component 9 - 28 Vdc: Kemo-M171-DC-Speed-Controller-Module-9-to-28V-Kemo-M171-A-power-speed-controller-module-for-regulating-DC-loads-such-as-DC-motors-light-bulbs-heaters-LEDs-with-series-resistors-etc-Electric-motors-will-run-well-even-at-low-speeds-because-the-pulse-width-controller-feeds-them-with-full-voltage-but-in-short-bursts-Kemo-M171-Speed-Controller-Component-9-28-VDC

Kemo M113A Time Switch

Kemo M113a Time Switch

Kemo M113a Time Switch: Kemo-M113A-Timer-Delay-Switch-Module-Kemo-M113A-Switches-on-other-devices-with-the-built-in-relay-contact-after-pushing-the-button-and-automatically-switches-them-off-again-after-a-set-time-The-time-can-be-stopped-any-point-by-pressing-the-second-button-Two-push-buttons-are-required-for-use-BR-Connection-via-flat-plug-on-the-module-middot-2-LED-display-1-x-LED-operating-voltage-1-x-LED-relay-ON-Kemo-M113A-Time-Switch

Kemo M085 Infrared Receiver

Kemo M085 Infrared Receiver

Kemo M085 Infrared Receiver: Kemo-M085-Infra-Red-Detector-Module-Kemo-M085-With-the-aid-of-this-infra-red-detector-it-is-possible-to-carry-out-functional-tests-on-infra-red-remote-control-units-infra-red-transmitters-and-light-barriers-etc-The-module-consists-of-an-infra-red-receiver-which-indicates-by-switching-on-an-LED-if-the-remote-control-on-test-emits-infra-red-radiation-It-is-suitable-for-most-infra-red-remote-controls-and-transmitters-The-detector-is-an-indispensable-piece-of-test-equipment-for-radio-and-...

Kemo M168 Car Voltage Spike Protector

Kemo M168 Car Voltage Spike Protector

Kemo M168 Car Voltage Spike Protector: Kemo-M168-Car-Voltage-Spike-Protector-Kemo-M168-The-Kemo-M168-Car-Voltage-Spike-Protector-permanently-suppresses-all-voltage-spikes-in-the-on-board-power-protecting-sensitive-on-board-electrics-against-damage-during-jump-starting-or-battery-charging-The-voltage-spike-protector-can-also-help-to-extend-the-life-of-car-bulbs-Simply-connect-the-module-parallel-with-the-12V-DC-car-battery-Kemo-M168-Car-Voltage-Spike-Protector

Kemo M091N Phase Coupler for Powerline Products

Kemo M091n Phase Coupler For Powerline Products

Kemo M091n Phase Coupler For Powerline Products: Kemo-M091N-Capacitive-3-Phase-Coupler-for-Power-Line-Products-Kemo-M091N-P-This-module-capacitively-connects-all-3-mains-phases-with-each-other-so-that-transfer-rates-of-up-to-650-Mbit-via-the-mains-supply-can-be-reached-for-internet-and-computer-networking-depending-on-the-nature-of-the-mains-supply-P-P-If-the-signal-is-fed-into-a-single-phase-only-the-phase-coupler-connects-all-3-phases-so-that-your-internet-or-computer-signal-will-be-available-via-all-other-mains-sockets-in-the-hous...

Marten Scarer Kemo

Marten Scarer Kemo

Marten Scarer Kemo: Protect your vehicle and rubber parts from the gnawing of martens, leading to defective ignition and brake cables. The module generates intermittent extremely loud ultrasound whistles at 100 dB ± 20 %, inaudible to us, to scare off martens. Operating voltage 12 V= / at 23 kHz and with E certification! Module (72 x 50 x 28 mm)

Velleman MK180 2-Channel Hi Power LED Flasher

Velleman Mk180 2-channel Hi Power Led Flasher

Velleman Mk180 2-channel Hi Power Led Flasher: The 2-canal High Power LED-indicator reflect itself by its PCB, if desired, distributed at pre-set breakages (Control panel and 2 Blinker module). This can be simply connected with a strand. With delivery 8 high performance white 20000 mcd LEDs are received. Operation with other LEDs is possible: Low Power, LED Stripes, LED Cluster etc. Controls the Blinking-speed and 7 Flashing light effects, where the last effect remains saved. Ideal for applications in construction models, alarm systems,...

Kemo M142 LED Contant Current Source Module

Kemo M142 Led Contant Current Source Module

Kemo M142 Led Contant Current Source Module: This LED with soldered constant current electronics may be connected at any voltage between 4–30 V/DC. The LED shines with almost constant brightness and has a consumption of ca.15 mA. An additional protective resistor is not required. The supplied LED can be exchanged for any other LED. It is also possible to connect several LEDs in series.

Kemo M087N LED Tester Module Component

Kemo M087n Led Tester Module Component

Kemo M087n Led Tester Module Component: This tester can be used to test light emitting diodes for all kinds of function, brightness, colour and polarity. The LEDs can optionally be tested with the following currents: 1 mA, 2.5 mA, 5 mA, 10 mA, 20 mA and 50 mA. The test contact can accommodate desoldered LEDs with solder residue on their pins as well as brand-new LEDs. 2 test sockets with the same current (10 mA) are arranged side by side for selecting LEDs of the same brightness.


12Next